4DHIFU+Radar Carving+Gold RF Microneedle Machine

Principle:

• With high-energy focused ultrasound, ultrasonic focusing can directly reach the SMAS layer, promote the suspension of SMAS fascia, and comprehensively solve the sagging and relaxation problems of the face. It precisely locates the ultrasonic energy at the 4.5mm fascia layer under the skin, which play a role in the fascia layer to growth and pull the muscle to achieve the best effects of shaping body and tightening skin .
• Radar Carving is the use of mechanical radar waves for good tissue penetration, accurately transferring 65 to 72 degrees of thermal energy to the skin’s SMAS layer, 1.5 epidermis, 3.0 dermis, 4.5 fascia, 4.5 collagen. (other one), 13 fat layer, 8.0 shaping, produce heat coagulation to shrink skin and regenerate collagen. In addition, It can be used to treat obesity and the chest by melting the fat layer (depth 8mm~13mm). 

• Gold RF is a high-tech instrument which integrates lattice, RF and microcrystalline, In addition to facial rejuvenation, golden radiofrequency microcrystals can improve skin quality such as large pores and pits, and can also treat stretch marks and axillary osmidrosis. Gold RF is through the ingenious combination of microcrystalline and radio frequency, the word “gold” comes from the microcrystalline crystal coated with gold film, the outer coating of microcrystalline is also golden yellow. During treatment, the doctor will adjust the penetration depth and the radio frequency energy according to the skin problems and treatment sites. Then radio frequency energy is emitted from the microcrystal tip, and then quickly exits. This is repeated until the treatment is completed, and finally the repair creams are applied.

Feature:

1. Two modes for 4D: fast mode or slow mode can be switched.
2. 4D: A maximum of 12 lines can be used in a single shot, and the maximum energy area is 11mm wide. the corresponding parameters can be adjusted according to the size of the skin area, which make the operation time is greatly shortened, make the energy point effects on the skin is more uniform, and the curative effect is better.
3. 4D Using the most advanced high-tech technology, it is equipped with two treatment heads according to the facial skin condition, which accurately affects different depths of skin, and the energy is slightly over the epidermis during treatment, and 100% without any damage.at the same time, the depth of the skin treated by the treatment head is consistent with the set value, ensuring the customer’s painless and comfortable.
4. In addition to the thermal effect on dermal collagen and collagen fiber, it also has thermal stimulation on the fat layer and fascia layer (SMAS), and the therapeutic effect is far better than that of Thermage.
5. The operation is simple and convenient, no need for consumables, greatly reducing treatment costs.

Operation:

1. Clean the Skin.
2.  Take a photo before treatment , and paint on the preoperative lifting location with make up pencil .
3.  According to the skin thickness to select appropriated transducer (Transmitter) .
4. Set suitable input intensity ( such as1.0-1.5J ) , focal length and spacing ( such as 1.5mm)
5. Applying ultrasonic plentiful gel as couplant between transducer and skin.
6. Face lifting operate on the note of power line, forming a line thermal condensed node in the specified depth under skin when the transmitting button is pressed per time, operating continued on the powder line until the specified location transmission is completed. The treatment parts such as face, chin and both sides of neck.
7. Don’t operate on marginal mandibular nerve and supra or bital nerve.
8. No recovery period after treatment, daub some moisture product and make up immediately.
9. Only once, the comprehensive effect will gradually appear in two or three moths,Some people may do this treatments several times.

Specification: